ESAB 308LSi grade stainless steel Mig welding wire is of high quality. A continuous solid corrosion resisting chromium-nickel wire for welding of austenitic chromium nickel alloys of 18% Cr - 8% Ni-type. 308LSi Mig welding wire has a good general corrosion resistance.
The alloy has a low carbon content which makes it particularly recommended where there is a risk of intergranular corrosion. The higher silicon content improves the welding properties such as wetting. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. Welding current DC(+)
Not sure what you're looking for our team have the expertise to help you find the right stainless steel might welding wire for your applications. Learn more.
ESAB 308L Stainless Steel Mig Wire
Typical Tensile Properties
Condition As Welded As Welded Shielding Gas Tested at 350°C. Tensile Strength 570 MPa 490 MPa Yield Strength 400 MPa 370 MPa Elongation 36 % 25 % Deposition Data
Current Deposition
Rate
Diameter Voltage Wire
Feed Speed
55-160 A 1.0-4.1 kg/h 0.8 mm 15-24 V 1.0-4.1 m/min
80-240 A 1.5-6.0 kg/h 1.0 mm 15-28 V 1.5-6.0 m/min 100-300 A 1.6-7.5 kg/h 1.2 mm 15-29 V 1.6-7.5 m/min 65-220 A 1.1-5.4 kg/h 0.9 mm 15-28 V 1.1-5.4 m/min 0.0-0.0 kg/h 0.6 mm 0.0-0.0m
/min
0.0-0.0 kg/h 1.14 mm 0.0-0.0 m
/min
230-375 A 5.2-8.6 kg/h 1.6 mm 23-29 V 5.2-8.6 m/min Classifications
Wire Electrode SFA/AWS A5.9 : ER308LSi
Werkstoffnummer : ~1.4316
EN ISO 14343-A : G 19 9 L SiApprovals
Grade 308L SA BT (M12) Society BV Approvals are based on factory location. Please contact ESAB for more information. Consumable Characteristics
Alloy Type Austenitic (with approx. 8 % ferrite) 19% Cr - 9%
Ni - Low C - High Si
Typical Weld Metal Analysis %
Wire
Composition
C Cr Cu Mn Mo Ni Si Si+Fe
0.01 % 19.9 % 0.10 % 1.8 % 0.15 % 10.5 % 0.9 % 9 %
