| Plasma cutting is an area in which Truflame
have an extensive knowledge, including the cutting of stainless
and mild steel from tin plate to over 70 mm using both hand
and machine torches.
Machines using mixed gases or compressed
air can be supplied, as well as machines with built in compressors
for ease of installation.
Bringing you top brand names and reliability:
 |
|
GOODWIN P30 Plasma Cutting Machine |
| Features and Benefits
The P30 offers 50% more output and is able
to cut 65mm thick metals, and, thanks to in-built power factor
correction, draws less current from the supply.
|
|
 |
For more information or to arrange
a demo just get in touch, go to our [contact
page].
|
|
ESAB Powercut® 875 |
POWERCUT® 875 is a very
powerful plasma cutting package in a tough casing, making it suitable
for most plasma cutting applications. It cuts mild steel
from thin plate up to 32mm, and also cuts aluminium and stainless
steel.
| Specifications |
External dimensions, LxWxH, mm
Weight, kg
Enclosure class, protection
Mains supply, V/Hz
Fuse, slow, A
Max output at 60% duty cycle, A
Open circuit voltage, V
Power factor at max current
Efficiency at max current
Setting range, A
Gas pre-flow, s
Gas post-flow, s
Air, l/min
Pressure, bar
Cutting capacity, Fe mm |
750x318x419
40
IP23S
230 (1/3ph) and 400 (3ph)/50
20
60
275
0,92
0,90
20-60
2
20
165
5,5
22/32 |
|
Delivery includes..:
The POWERCUT®
875 comes out of the box ready to use. The torch
PT-32EH is attached with parts in place, primary cord is attached
and the filter regulator is installed. Just hook up the air,
plug it in and cut. Start-up wear parts kit included.
|
|
|
SELCO Sistor 142 |
The Sistor 142 plasma-arc cutting
generator is specially designed for thick sheet work and for high
output applications.
The Sistor 142 can cut through up to 50 mm of carbon steel, stainless
steel, and aluminium with a limited consumption of electrical energy
and compressed air.
It is the ideal machine for cutting all types of conductive material
on site or in the factory.
Cutting current can be continuously adjusted in the range from 20A
to 140A and is independent of mains voltage variations.
Electronic control of the cutting process reduces electrode and
nozzle wear.
If used beyond the rated parameters a thermal device and a mains
voltage protection, protect the internal components from malfunctioning.
Two alarms are also provided, one to cut off the output voltage
when the torch is not completely assembled and the other to prevent
operation with incorrect compressed air pressure.
| Technical Data |
| Voltage |
Fuse |
Cutting current 40°C |
Cutting thickness |
Flow rate
l/min |
Degree of protection |
Class of isolation |
Dimensions
mm |
Weight
kg |
| 230/400V |
16A |
40%
60%
100% |
140A
120A
90A
|
50mm |
230 |
IP 21 S |
H |
400x700x780 |
144 |
|
|
For more information please
[contact us]
[top of page]
|
